No Seam.
No Weld.
No Compromise.
From titanium rocket nozzle liners to micron-tolerance centrifuge housings — seamless axisymmetric components spun to flight-qualified specifications.
From Flat Disc to
Flight-Qualified Component
Blank Loading
Flat disc or tube blank is centered on the mandrel spindle. Material verified against cert sheet. Runout checked to ±0.10 mm before first rotation.
First-Pass Roughing
High-force roller engages the blank at programmed feed rate. Material flows axially over mandrel profile. Wall begins thinning from stock to near-net shape.
Intermediate Annealing
Work-hardened blank enters controlled-atmosphere furnace. Stress relief restores ductility before final forming. Temperature and soak time logged to job traveler.
Finish Pass
Precision roller traces final contour at reduced feed. Wall thickness converges to nominal. Surface finish achieves Ra 1.6 µm or better without secondary grinding.
CMM Inspection
Part transferred to temperature-controlled CMM cell. 100-point scan verifies concentricity, wall uniformity, and profile against nominal CAD. First Article Report generated.
Delivery Crating
Part cleaned, coated per spec, and nested in custom foam-lined crating. Packaging engineered for vibration loads per ASTM D4169. Ready for first-article delivery.
Certified to Fly.
AS9100 Rev. D
Aerospace Quality Management System. Every job traveler, material cert, and inspection record maintained to aerospace traceability standard.
NADCAP Certified
National Aerospace and Defense Contractors Accreditation Program. Special processes — heat treat, NDT, coatings — audited to AWS D17 and AS9100.
ITAR Registered
International Traffic in Arms Regulations. Classified-spec defense components handled under full ITAR compliance. US persons only on controlled programs.
CMM Metrology Lab
Temperature-controlled metrology cell. Renishaw probing systems. First Article Reports per AS9102. 100-point verification on critical surfaces.
The Numbers Don't Lie.
Side-by-side process data for procurement engineers evaluating forming method. Winning cells highlighted.
Download the Spinning vs. Stamping Spec Sheet
12-page technical brief with tolerance charts, material compatibility matrix, and volume break-even analysis.
Send Us
Your Drawing.
DXF, STEP, PDF — any format. We'll review your geometry, flag any formability concerns, and return a firm quote with lead time within one business day.